Secondary Containment Systems
BLADDER
DIKE®
- Portable
- Sets up on any
portable surface - Rugged and re-usable
- Stores and ships compact
- Modular: configures in various
shapes and sizes - Sets up and breaks down quickly
- No special lifting equipment required
Bladder Dike®
Withstands Catastrophic Bladder Failure
Assembled Without Special Tools
Closed End Provides Structure
Bladder Dike is a heavy-duty, re-useable, Fuel Bladder containment system that will withstand a catastrophic bladder failure. Able to ship on a single A.F. pallet; set up in minutes. Patent pending design has been demonstrated to with-stand 5000 lb. hits when fuel bladders experience catastrophic failures.
Construction and Capabilities
POLY DIKE WALLS (PDW)… This is the basic building block of the PDW system. Our dike wall containment system comes in standard 8' lengths. A 36" high PDW weighs approximately 120 lbs. For added structure, one end of the PDW is closed. At the closed end, the final 8" of the wall is indented 1/4". This indentation allows for the closed end of the PDW to be inserted into (mated with) the open end of the adjacent wall. Tying the PDW's together adds structure at both ends of each wall section. The PDW joints are further secured with a lock pin. The bottom of the wall is finished with a 3" wide flange on both sides. These are drilled with 3/8" holes to accommodate an anchor stake. Walls should be staked in areas where heavy hoses will be draped over the walls or where there will be significant operator traffic over the walls.
For more information about fuel bladder containment or dike wall containment, call 800.275.3453
Bladder Dike is a registered trademark of Polystar Inc.